เครื่องเล่นแผ่นเสียง Pro-Ject 2 Xperience DC Acrylic (New)

2Xperience was developed from the now legendary Pro-Ject 2. This balanced and low-resonance design is a perfect combination of sandwich construction, acrylic chassis, MDF platter with vinyl mat and the Pro-Ject 9cc top class tone-arm made from carbon fibr

Turntable

• A quiet running AC motor with a two-step pulley drives the platter’s outside edge via a belt.

• The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.

• The motor is decoupled from the plinth to reduce vibration transmission.

• The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.

• The platter’s low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.

• Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.

• External power supply avoids potential electro-mechanical interference.

 

Tonearm 9cc

• As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.

• The headshell and armtube are fashioned from a single piece of carbon-fibre.

• Conical armtube avoids standing wave reflections.

• Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.

• Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.

• Design of counterweight effectively counteracts unwanted resonances.

• The counterweight supplied is suitable for cartridges weighing between 6 – 10g. Alternative counterweights for cartridges weighing between 11 – 15g, 8 – 11g or 5 – 8g are available as an accessory part.

• Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.

• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).

• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.

• Silicone-damped armlift can be adjusted to suit working height of the arm.

• The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.