หัวเข็ม Audio Technica AT-OC9XSL (New)

AT-OC9XSL

The next Generation of the legendary OC9 cartridge series

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve.

• Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response
• A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
• Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
• Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
• Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Special Line Contact Stylus

Special Line Contact diamond profile offers the ultimate in accurate sonic reproduction

Easy mounting

Threaded holes in the cartridge body enable the cartridge to be mounted on to the headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required.

Aluminium Body

Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Made in Japan

Produced in the Audio-Technica Fukui factory in Japan under strict quality control for precise manufacturing.

Cartridge & Stylus
Frequency Response	20 – 50,000 Hz
Channel Separation	28 dB (1 kHz)
Vertical Tracking Angle	20 degrees
Vertical Tracking Force	1.8 to 2.2 g (standard 2.0 g)
Stylus Construction	Nude rectangular shank
Recommended Load Impedance	Min 100 Ohms
Coil Impedance	12 Ohms (1 kHz)
DC Resistance	12 Ohms
Coil Inductance	25 μH (1 kHz)
Output Voltage	0.4 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance	0.5 dB (1 kHz)
Stylus Shape	Special Line Contact
Cantilever	0.28 mm Ø nude boron
Static Compliance	22 x 10 – 6 cm / dyne
Dynamic Compliance	18 x 10 – 6 cm / dyne (100 Hz)
Mounting	1/2” centers / Threaded inserts
Cartridge Weight	7.6 g
Dimensions	17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included	1 non magnetic screw driver 1 brush 2 washers 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm 1 plastic protector
Body Material	Aluminium
Model	AT-OC9XSL
Stylus Size	1.5 x 0.28 mil
Terminal Pins	Brass
Wire Used for Coil	PCOCC (Copper by Ohno Continuous Casting process.)