ปรีโฟโน MM Aiyima T3 (New)

Specifications:
Output level: 600mV @3mV 1KHz
Signal to noise ratio: ≥98dB
Working voltage: DC12V 2A
Dimensions: 118.5*98*33MM (without protruding knobs and terminals)
Frequency response: RIAA compliant
Distortion: 0.1%

Operation Steps:
1. The gear switch is in the OFF state.
2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the lower pin is deformed before installing the tube, and the deformation can be reversed by hand).
3. Connect the sing-out output cable to the audio input connector.
4. Connect the rear-end device that needs an external connection to the audio output connector.
5. Connect the DC12V power supply.
6. Rotate the gear switch to select the desired gain gear.
7. When the preamp input is input, the phono input will automatically switch to the preamp input.
8. Input interface: (can be connected to CD, DAC decoder, mobile phone, TV, etc.)
9. Audio output interface: (such as amplifier, amp, active speaker, etc., red to the right channel, white left channel)